Product Description
Electric Car Jack (WH-001)
SPECIFICATIONS
Carrying capacity: 1500kg
Voltage: DC 12V
Maximum current: 10A
Frames the output: 100W
Fluctuation scope: 11~35cm
Weight: 4.1kg
Dimensions: 370*230*100(L*W*H)

Operation instructions:
1. please put a block or a product before the tire to avoid the car movement;
2. Open the box to take out the electrical car jack;
3. Insert the plug of lighter into the car lighter jack;
4. Put the E-car jack under the car, the saddle of the car jack should be placed against the right bottom of the car;
5. Press "∧" key till the car is jacked to an ideal height;
6. Press "∨" key to lower the E-car jack after replacing the tire;
7. Clean the E-car jack and put it back to the box.

Warning:
1. Please read carefully and understand the user manual before using the product;
2. Overload is forbidden;
3. Must avoid the product that be jacked to move;
4. Must to park the braked car on smooth and solid ground;
5. Working under the product that is being jacked is forbidden;
6. It is a jack, using it as the support tool is forbidden;
7. To avoid to nip your fingers, it is forbidden to put your hand into the machine;
8. To avoid injury or losing property you must abide the warning.

Attention:
1. Please pay special attention to the following position which may nip your fingers;
2. If the E-car jack can't work after the car be lifted, you can insert the hand wrench into the cover of gear box to lower the E-car jack.

Maintenance:
1. Put lubricant on the screw bolt of the car lifted a periodically;
2. Keep it clean and dry after operation;
3. Any change in the structure, which might affect its safety, is forbidden;
4. The car lifted must be maintained and repaired by professionals if the machine has something wrong.

Storage:
1. It is stored in the temperature 0ºC~ 40ºC with humidity less than 70%;
2. To avoid severe collision, upside down and water during transportation.